|
<< Click to Display Table of Contents >> GetTrfr2WData Method
|
  
|
|
<< Click to Display Table of Contents >> GetTrfr2WData Method
|
|
procedure GetTrfr2WData(
const Name: WideString;
out Quantity: Integer;
out PrimV, SecV, Rating, Derating: Double;
out UserCode: WideString;
out OL, Zp, XRp, Zz, XRz: Double;
out AutoTrfr, AutoTrfrGrnd,PrimVec, SecVec: Integer;
out PhaseShift, Rp, Xp, Rs, Xs: Double;
out Taps, TNom, TPos: Integer;
out TStep, Vmin, Vmax: Double;
out TapLock, PrimTap: Integer;
out NoLoadPpu, NoLoadIpu, ZoMag, IBoost: Double
);
Retrieves the Transformer's data.
Input Parameter |
Usage |
Name |
Transformer Name |
Output Parameter |
Usage |
Quantity |
Number in Parallel |
PrimVoltage |
Transformer Primary Voltage (V) |
SecVoltage |
Transformer Secondary Voltage (V) |
Rating |
Transformer Rating (VA) |
Derating |
Transformer Derating |
UserCode |
Transformer User Code |
OL |
Transformer Overload Rating (p.u.) |
Zp |
Transformer Positive Sequence Impedance |
XRp |
Transformer Positive Sequence XtoR Ratio |
Zz |
Transformer Zero Sequence Impedance |
XRz |
Transformer Zero Sequence XtoR Ratio |
AutoTrfr |
AutoTransformer status (1-Autotransformer, 0-not autotransformer) |
AutoTrfrGrnd |
AutoTransformer Grounding status (1-Grounded, 0-not Grounded) |
Transformer Primary Winding Type and Earthing arrangement, eg : Star earthed would be : YN. |
|
Transformer Secondary Winding Type and Earthing arrangement, eg : Delta not earthed would be : D. |
|
PhaseShift |
Transformer Phase Shift (degrees) |
Rp |
Resistance value for the primary earthing equipment |
Xp |
Reactance value for the primary earthing equipment |
Rs |
Resistance value for the secondary earthing equipment |
Xs |
Reactance value for the secondary earthing equipment |
Taps |
Transformer Number of Taps |
TNom |
Transformer Nominal Tap Number |
TPos |
Transformer Tap Position |
TStep |
Transformer Steps |
VMin |
Tap Control Voltage Minimum (p.u.) |
VMax |
Tap Control Voltage Maximum (p.u.) |
TapLock |
Transformer Tap Position Locked (1 - Locked,0 - not Locked) |
PrimTap |
1 if the tap changer is on the Primary Side of the Transformer, 0 if not. |
NoLoadPpu |
No Load Loss (pu) |
NoLoadIpu |
No Load Current (pu) |
ZoMag |
pu Zo Magnetizing factor |
IBoost |
Specify the percentage internal voltage boost of the transformer |
None
PowaMasterObj.GetTrfr2WData( Name, Quantity, PrimV, SecV, Rating, Derating, UserCode, OL, Zp, XRp, Zz, XRz, AutoTrfr, AutoTrfrGrnd, PrimVec, SecVec, PhaseShift, Rp, Xp, Rs, Xs, Taps, TNom, TPos, TStep, Vmin, Vmax, TapLock, PrimTap, NoLoadPpu, NoLoadIpu, ZoMag, IBoost);